Kündig Technic Vmax sanders are for applications where requirements regarding surface quality are high, especially when it comes to window frame production. Two symmetrically arranged oblique sanding units forming the shape of a "V" generate what could be described as an oblique cross-sanding procedure.
Kündig offers a specialised model for window production, the "Vmax". Two symmetrically arranged oblique sanding units forming the shape of a "V" allow the elimination of sanding traces on window sashes with long and cross-grain sections. The combined oblique units generate what could be described as some sort of oblique cross-sanding. This allows for assembled window frames to be sanded using the whole working width, reducing vibrations on the frame and ensuring great surface quality. Slight rotating of the frame in order to avoid vibrations is not required thanks to the double sanding technology, hence saving precious working width. Thanks to the dual shearing cut with differing angles, approximately 90% of fibres can be cut off. Intermediate sanding with water based lacquers takes noticeably less time, or under favourable circumstances, can even be omitted completely. Thus providing significant cost saving potential.
The Kündig Technic-2 1600-RdEd Vmax is equipped with an oblique roller unit and an oblique, electronically controlled, segmented pad. These units are arranged +10°/-10° and create the shape of a "V". This allows for assembled window frames to be sanded using the whole working width, reducing vibrations on the frame and ensuring great surface quality on cross and long grain sections of window frames.
Kündig Brilliant sanders have at least one oblique sanding unit. With traditional, parallel sanding units, even after short use, sanding belts show small damages, grit outbreaks and irregularities due to wear and clogging. These imperfections negatively affect the sanding image, particularly on delicate surfaces like lacquer or veneer. This inherent flaw of the parallel sanding process can be avoided by pivoting the sanding unit by 10°. Further advantages are absence of oscillation marks, extended life of sanding belt due to this error tolerant procedure and significantly better sanding quality. For lacquer and veneer applications this technology is ground-breaking, but its great advantages are also very visible in window production or fine solid timber work.
Oblique sanding units are available as calibration rollers, pneumatic pads, electronically controlled segmented pads and combined solutions and offer the usual durability and reliability of Kündig products. They can be combined with our high gloss cross-belt unit, brush units and all the available dust removing devices.
|Calibration Roller Rd||Calibration Roller Gd||Combined Unit Kd/Cd||Sanding Pad Pd||Sanding Pad Ed|
|Calibration Roller oblique||Large Calibration Roller oblique||Kd = with Pneumatic Pad Cd = with Segmented Pad||Sanding Pad Brilliant oblique pneumatic||Sanding Pad Brilliant oblique segmented|
|1100mm||1350mm||1600mm||1900mm||2200mm||Other working widths on request|
Well proven sanding pad technology, especially for solid timber processing. A continuous air cell provides even pressure on the workpiece.
The segmented pad is divided in segments either 35 or 22 mm wide. These segments are computer controlled and preferences can easily and thoroughly be adjusted by the operator. The electronically controlled, segmented pad is especially useful for taking care of those delicate workpiece edges on lacquered or veneered parts.
Segments and therefore the sensing rollers at the machine entry are available in 35 or 22mm width. Depending on the material that needs to be sanded, a variety of sanding shoe hardnesses are available. Two different hardness shoes are included from the factory.
Production and processing of individual parts before assembling the window frames are a very common method. Despite state of the art planing technology, customer demands regarding coating quality often can't be met anymore when surfaces are just planed. That's where sanding comes in. The sander is usually found directly after the CNC machining center.
For single parts production, our Vmax technology is usually not necessary. The Premium series of machines are characterised by the classic parallel unit layout. The Kündig Premium-2 650-RP is a great example for a well proven solution, which is also easy to integrate into existing production lines. In Kündig sanders, only the upper section moves for height adjustment. The result is a fixed working height. There are many advantages to this philosophy. One of them is that machines with a fixed working height can effortlessly be combined with other machines in a production line. Also the Premium-2 650-RP is very compact and barely takes up any space.